June 13, 2022 11:38 pm


A pellet stove thermostat is a vital component of any pellet stove. It regulates the heat output from the stove and ensures that the pellets are burned properly, resulting in an even heat distribution throughout the appliance. Pellet stove thermostats come in many different types and can be found both at retail stores and online.

How does a pellet stove thermostat work?

The thermostat on a pellet stove is a key part of the overall operation of the stove. It helps to ensure that the stove is running at the correct temperature, and that it is not running too hot or too cold. The thermostat works by sensing the temperature of the air in the room, and then sending a signal to the stove to tell it how hot to run. This helps to keep the room at a comfortable temperature, while also ensuring that the stove is running efficiently.

The different types of pellet stove thermostats

There are three types of thermostats used in pellet stoves: manual, digital, and programmable. The most common type is the manual thermostat. This type has a dial that you turn to set the temperature. The digital thermostat has a display that shows the current temperature and allows you to set the desired temperature. The programmable thermostat lets you program different temperatures for different times of the day.

How to install a pellet stove thermostat

Installing a pellet stove thermostat is a relatively easy task that can be completed in under an hour. The most important thing to remember when installing a pellet stove thermostat is to read the manufacturer’s instructions thoroughly. The first step is to remove the old thermostat from the wall. Some thermostats are held in place by screws, while others are attached with wires. Once the old thermostat is removed, it’s time to install the new one. To install the new thermostat, first find the spot on the wall where it will be installed and mark it with a pencil. Then use a drill to make a hole in the wall at the marked spot. Next, insert the wires from the new thermostat into the hole and screw it into place.

Automatic vs. Manual Thermostats

When it comes to thermostats, there are two main types: automatic and manual. Automatic thermostats turn on and off the heat depending on the temperature you set. Manual thermostats require you to turn them on and off yourself. Many people believe that automatic thermostats are better because they don’t have to worry about turning them on or off. However, some people prefer manual thermostats because they can be more precise in their heating. For example, if you have a pellet stove, you may want to use a manual thermostat so that you can adjust the heat depending on how much fuel you have left.

Safety Features

When shopping for a pellet stove, it is important to consider the thermostat. Many models come with a variety of safety features that can help prevent accidents and keep your home safe. One such feature is an automatic shut-off. This will ensure that the stove will turn off if it gets too hot, preventing a fire from breaking out. Other features include an overheat sensor and a safety switch. The overheat sensor will activate if the stove gets too hot, shutting it down until it has cooled down. The safety switch will automatically turn off the stove if it is tipped over or if something falls on it. These features work together to help keep your family safe while using the pellet stove.

Best Pellet Stove Thermostats (and where to buy them)

QuadraFire Mt. Vernon Pellet Stove AE Wall Control Thermostat

QuadraFire Mechanical Thermostat

ComfortBilt Pellet Stove (built-in thermostat)

Englander. Pellet Stove (built-in thermostat)

Conclusion: Pellet Stove Thermostats

In conclusion, a thermostat is an important part of a pellet stove. It helps to ensure that the stove is running at the correct temperature, which in turn keeps your home comfortable and warm. Before you purchase a pellet stove, be sure to research the different thermostats available and find the one that best suits your needs.

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}