October 31, 2022 11:49 am


Although pellet stoves are considered more efficient and environmentally but one of the FAQs is why is my pellet stove so loud. If you’ve been struggling to keep your home warm this winter because of the noise your pellet stove is making, don’t worry – we’re here to help. In this post, we’ll explore the reasons why pellet stoves are loud and offer some tips on how to reduce the noise. Keep reading to learn more!​

What Are The Possible Causes Of A Loud Pellet Stove?

A pellet stove is designed to heat your home by burning pellets made of compressed wood. Though pellet stoves are usually quite efficient, they can sometimes be noisy. There are a few potential causes of a loud pellet stove.

  • One possibility is that the pellets are too dry. If the pellets are too dry, they will burn quickly and produce a lot of ash.
  • Another possibility is that the auger that feeds the pellets into the stove is clogged. A clogged auger can cause the pellets to jam, resulting in a loud noise.
  • Finally, the exhaust fan may be set too high. If the exhaust fan is set too high, it will create a lot of turbulence, which can make the pellet stove noisy. If your pellet stove is making a lot of noise, try adjusting the settings and see if that helps to reduce the noise level.

What To Do If The Pellets Are Too Dry?

If your pellets are too dry, they may make a cracking or popping noise when they burn. This is perfectly normal and is not cause for concern. However, if the pellets are significantly below the recommended moisture level, they may produce less heat and produce more smoke. If this occurs, you should add water to the hopper to moisten the pellets. Once the pellets have absorbed some of the water, they will expand and the cracking noise should stop. You can then resume using your pellet stove as normal.

What To Do If the Auger Is Clogged?

If the auger is clogged and makes noise in the pellet stove, there are a few things you can do to clear the clog and get your stove up and running again. First, check the auger tube to see if anything is blocking the path of the auger. If you see a blockage, remove it and clear any debris from the area. Next, inspect the auger blades to make sure they are not damaged or bent. If they are, replace them with new blades. Finally, check the pellets themselves to see if they are clumped together or damp. If so, replace them with fresh pellets. By following these simple steps, you can quickly and easily clear a clogged auger and get your pellet stove up and running again.

What Can You Do If The Exhaust Fan Is Set Too High?

If the exhaust fan is set too high, it will cause the pellet stove to make a lot of noise. The first thing you should do is check the manufacturer’s instructions to see what the recommended setting for the exhaust fan is. If the fan is set too high, it will cause the pellets to burn too fast and produce a lot of smoke. This will make the pellet stove very inefficient and could damage the stove. To avoid this, you should lower the setting of the exhaust fan until the pellet stove is operating more efficiently. You may also need to adjust the settings of the other fans in the system to compensate for the change in the exhaust fan setting.

How Can You Tell If The Noise Is Normal Or Not?

Any time you have a new appliance, it is normal to be concerned about whether or not the noise it is making is normal. With pellet stoves, in particular, there are a few things you can listen for to help determine if the noise is something to be concerned about.

  • First, when you first start up your pellet stove after refilling it with pellets, you may notice a louder-than-normal noise as the pellets begin to drop into the burner. This should only last for a minute or two and then return to the normal operational sound level.
  • Second, pellet stoves will make some slight cracking and popping noises as they operate. This is due to the pellets igniting and is perfectly normal.
  • Third, you may hear a whooshing noise as air is drawn into the pellet stove to help keep the fire burning. Again, this is normal and nothing to be concerned about.
  • In general, as long as you don’t hear any banging, grinding, or other sharp noises coming from your pellet stove, it is probably operating normally. If you are ever unsure, however, it is always best to consult your owner’s manual or contact the manufacturer directly.


Pellet stoves are a popular choice for heating your home, but they can be quite loud. If you’re experiencing excessive noise from your pellet stove, there are several things you can do to mitigate the sound. We’ve outlined some of these solutions in this article, so be sure to give them a try if you’re having trouble with noise control. Hope they will be helpful. If You have tried any of these methods? Do you have another suggestion to add? Let us know in the comments below.

Thank you for reading!

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}